48th Street North St. Pete Driveway Aprons

48th Street North St. Pete sits in west St. Petersburg, north of Central Avenue, where older concrete aprons commonly crack at the gutter and the private drive. PaverForge Hardscapes replaces that street-cut with a paver apron built for daily car traffic, not a decorative border laid on sand.

What the apron has to do

The apron is the short run between the public curb or sidewalk and the private driveway. On these blocks the gutter line, the sidewalk joint, and a utility patch often meet in one cut. A paver field that ignores that joint rocks, pumps sand, and opens a lip the city will flag.

• Saw-cut and remove the failed concrete only on the private side unless the city scope says otherwise.

• Call 811 before excavation so water, sewer, and gas marks are on the ground.

• Compact the base in lifts and hold an expansion gap at the concrete gutter.

• Set the flare so both tires track onto the drive without a ridge.

• Lock the edge with a restrained border, not a loose soldier course.

Street and flood notes

West St. Pete lots in this corridor are often low and slow to drain after a summer storm. The apron should pitch to the gutter, not back toward the garage. PaverForge does not claim the public right-of-way; if the sidewalk panel itself is broken, that stays a city or permit question. Call 727-490-9798 or use the form at paverforge.com/services to schedule a look.

Related work on the same visit can include the first 10 feet of the drive, a hose-spigot splash pad, and a flush transition at the garage. Serving St. Pete Beach and Pinellas County from 33706.