What are flush seawall gas meter isolation pads?

Flush seawall gas meter isolation pads keep the gas meter and related piping accessible for inspection and service without transmitting load or vibration into the cap or the adjacent paver field. The pad stays flush so carts and hoses still cross it, and the surrounding field drains. The utility owns the meter. PaverForge Hardscapes owns the paver bay that lifts later. Call 727-490-9798.

What are flush seawall water meter isolation pads?

Flush seawall water meter isolation pads are custom pads that create a stable, level mounting surface for water meters and utility connections at the seawall. They prevent settlement in coastal soils, improve access for meter reading and service, and maintain a clean flush appearance for Pinellas County waterfront properties.

What are flush seawall utility conduit isolation pads?

A flush utility conduit isolation pad keeps the seawall-cap pavers level around a conduit chase that still has to lift for service. The frame is isolation, not structure for the wall. The marine contractor owns the conduit and the bonding. PaverForge owns the paver bay that stays flush and lifts later. Call 727-490-9798.

Building a Liquid-Chlorine Tank Containment Pad in Pinellas

paverforge

Oct 1

1 min read

Liquid chlorine is common on Pinellas salt and tablet conversions that still keep a backup tank. A tank set on bare shell or on the pool deck will etch pavers the first time the hose drips. The pad is a containment detail, not a decoration.

Containment before camouflage

We pour or set a small pad with a curb high enough to hold a realistic spill, isolate it from the finished paver field, and pitch the curb interior to a point the pool tech can pump out. Stormwater and pool-chemical waste are not the same outfall.

Keep the tank off the screen-cage footer and off the deck joint.
Set the pad above the king-tide splash line on canal lots.
Use a chemical-resistant surface, not a dyed paver that will bleach.
Leave hose clearance so the fill does not cross the walking path.

What we do not do

We do not tie a chlorine-spill drain to a yard inlet that discharges to the bay. If the site cannot legally take the waste, the pad is a hold-and-pump curb, and the service company removes the spill. That is a layout decision, made before the pavers go in.

PaverForge Hardscapes is based in St. Pete Beach. For a pool-equipment pad quote, call 727-490-9798 or book at https://www.paverforge.com/book-online.

Building a Liquid-Chlorine Tank Containment Pad in Pinellas

Containment before camouflage

What we do not do

Recent Posts

Comments