What are flush seawall gas meter isolation pads?

Flush seawall gas meter isolation pads keep the gas meter and related piping accessible for inspection and service without transmitting load or vibration into the cap or the adjacent paver field. The pad stays flush so carts and hoses still cross it, and the surrounding field drains. The utility owns the meter. PaverForge Hardscapes owns the paver bay that lifts later. Call 727-490-9798.

What are flush seawall water meter isolation pads?

Flush seawall water meter isolation pads are custom pads that create a stable, level mounting surface for water meters and utility connections at the seawall. They prevent settlement in coastal soils, improve access for meter reading and service, and maintain a clean flush appearance for Pinellas County waterfront properties.

What are flush seawall utility conduit isolation pads?

A flush utility conduit isolation pad keeps the seawall-cap pavers level around a conduit chase that still has to lift for service. The frame is isolation, not structure for the wall. The marine contractor owns the conduit and the bonding. PaverForge owns the paver bay that stays flush and lifts later. Call 727-490-9798.

Flush Seawall Dock-Gate Strike Plates

paverforge

Oct 9

1 min read

A dock gate that closes against the seawall cap needs a strike the latch can find, and a plate the pavers can sit flush against. Hinge plates keep the leaf swinging. The strike plate is the other end: the receiver, the stop, and the small field that gets kicked every time someone misses the latch.

What the plate has to do

We set the strike so the gate closes without dragging the cap, and so the plate does not become a toe catch when the leaf is open. The paver collar around it is a removable section, not a field glued over the hardware. Salt water and a missed latch will chew a buried receiver. A plate that lifts lets the marine hardware be replaced without sawing the walk.

Pitch on the collar goes to the cap outfall, not into the strike pocket. If the gate is metal, the plate stays clear of the bonding path the electrician already marked. We do not bury the latch in joint sand. The opening is the size of the hardware, not a trench across the cap.

How to start

PaverForge Hardscapes is based in St. Pete Beach. For a dock-gate strike plate on an existing cap walk, call 727-490-9798 or book at https://www.paverforge.com/book-online. Send a photo of the latch side and the cap joint.

Flush Seawall Dock-Gate Strike Plates

What the plate has to do

How to start

Recent Posts

Comments