What are flush seawall gas meter isolation pads?

Flush seawall gas meter isolation pads keep the gas meter and related piping accessible for inspection and service without transmitting load or vibration into the cap or the adjacent paver field. The pad stays flush so carts and hoses still cross it, and the surrounding field drains. The utility owns the meter. PaverForge Hardscapes owns the paver bay that lifts later. Call 727-490-9798.

What are flush seawall water meter isolation pads?

Flush seawall water meter isolation pads are custom pads that create a stable, level mounting surface for water meters and utility connections at the seawall. They prevent settlement in coastal soils, improve access for meter reading and service, and maintain a clean flush appearance for Pinellas County waterfront properties.

What are flush seawall utility conduit isolation pads?

A flush utility conduit isolation pad keeps the seawall-cap pavers level around a conduit chase that still has to lift for service. The frame is isolation, not structure for the wall. The marine contractor owns the conduit and the bonding. PaverForge owns the paver bay that stays flush and lifts later. Call 727-490-9798.

Flush Seawall Fuel-Fill Splash Collars

paverforge

Oct 6

1 min read

A flush fuel-fill splash collar keeps dock rinse, drip, and hose splash in a framed bay instead of on the seawall cap pavers.

PaverForge Hardscapes sets those collars on St. Pete Beach, Treasure Island, and the Pinellas canal lots we already work. The marine contractor owns the fill, the vent, and the bonding. We own the paver bay that stays flush and lifts later.

What the collar is

It is a small framed opening in the cap walk, set flush so a hose and a cart still cross it. The frame is isolation, not structure for the wall or the fuel fitting.

The collar catches rinse that would otherwise cut the joint sand and stain the field. It lifts when the fitting, the hose, or the deck seal needs a reset.

What we do not do

We do not size the fill, move a vent, or bond the fitting. That stays with the marine contractor. We do not bury the fitting under a locked border and call it finished.

Call 727-490-9798 or book at https://www.paverforge.com/book-online. Photos of the fill, the cap walk, and the stained pavers are enough to start.

Flush Seawall Fuel-Fill Splash Collars

What the collar is

What we do not do

Recent Posts

Comments