What are flush seawall gas meter isolation pads?

Flush seawall gas meter isolation pads keep the gas meter and related piping accessible for inspection and service without transmitting load or vibration into the cap or the adjacent paver field. The pad stays flush so carts and hoses still cross it, and the surrounding field drains. The utility owns the meter. PaverForge Hardscapes owns the paver bay that lifts later. Call 727-490-9798.

What are flush seawall water meter isolation pads?

Flush seawall water meter isolation pads are custom pads that create a stable, level mounting surface for water meters and utility connections at the seawall. They prevent settlement in coastal soils, improve access for meter reading and service, and maintain a clean flush appearance for Pinellas County waterfront properties.

What are flush seawall utility conduit isolation pads?

A flush utility conduit isolation pad keeps the seawall-cap pavers level around a conduit chase that still has to lift for service. The frame is isolation, not structure for the wall. The marine contractor owns the conduit and the bonding. PaverForge owns the paver bay that stays flush and lifts later. Call 727-490-9798.

Flush Seawall Shore-Power Inlet Collars

paverforge

Oct 6

1 min read

A flush shore-power inlet collar keeps the seawall-cap pavers level around the inlet a boat cord still has to reach.

PaverForge Hardscapes sets those collars on St. Pete Beach, Treasure Island, and the Pinellas canal lots we already work. The marine electrician owns the inlet, the conductors, and the bonding. We own the paver bay that stays flush and can be lifted later.

What the collar is

It is a framed opening in the cap walk, set flush so a hose and a cart still cross it. The inlet sits in the recess, not proud of the field. The frame is isolated from the inlet body so a future pull does not crack the surrounding courses.

We do not grout the inlet cover to the pavers. Pitch leaves the recess high enough that rinse water does not sit in the bay. A trapped splash collar is added only if the cap has no other outfall.

The cord path gets a slight chamfer at the frame so a plug does not catch a paver edge on the way to the boat. We do not bury the inlet or change its height. That is the electrician's detail.

Call 727-490-9798 or book at https://www.paverforge.com/book-online if the shore-power inlet is rocking the cap pavers.

Flush Seawall Shore-Power Inlet Collars

What the collar is

Recent Posts

Comments