What are flush seawall gas meter isolation pads?

Flush seawall gas meter isolation pads keep the gas meter and related piping accessible for inspection and service without transmitting load or vibration into the cap or the adjacent paver field. The pad stays flush so carts and hoses still cross it, and the surrounding field drains. The utility owns the meter. PaverForge Hardscapes owns the paver bay that lifts later. Call 727-490-9798.

What are flush seawall water meter isolation pads?

Flush seawall water meter isolation pads are custom pads that create a stable, level mounting surface for water meters and utility connections at the seawall. They prevent settlement in coastal soils, improve access for meter reading and service, and maintain a clean flush appearance for Pinellas County waterfront properties.

What are flush seawall utility conduit isolation pads?

A flush utility conduit isolation pad keeps the seawall-cap pavers level around a conduit chase that still has to lift for service. The frame is isolation, not structure for the wall. The marine contractor owns the conduit and the bonding. PaverForge owns the paver bay that stays flush and lifts later. Call 727-490-9798.

Flush Seawall VHF Antenna Base Plates

paverforge

Oct 8

1 min read

A VHF antenna on a Palm Harbor or Ozona seawall is only as steady as the plate under it. A lag screwed into the cap edge rocks in the wind, cracks the cope, and leaves a rust streak down the face. A flush base plate lets the mast come off for a storm without opening the wall.

What the plate is

The plate is a recessed stainless or composite pad set into the cap, with a cable sweep and a bonding lug the marine electrician can reach. The paver or concrete collar around it is pitched so wash water and spray do not sit in the recess. We do not bury the coax in the joint sand.

The plate is isolated from the walking surface so a bare foot does not find a bolt, and so the antenna ground is a known point instead of a random piece of rebar. If the cap is already spalled, we cut a clean recess instead of fastening to the failed edge.

When to call

If the mast leans, the cap is cracked at the bolts, or you are adding a radio before a new dock walk goes down, do the plate with the hardscape. Call PaverForge Hardscapes at 727-490-9798 or book at https://www.paverforge.com/book-online.

Flush Seawall VHF Antenna Base Plates

What the plate is

When to call

Recent Posts

Comments