Pool Filter Backwash Discharge Splash Pads

A sand or DE filter backwash dumps a short, dirty surge. On a Pinellas pool deck that surge is often aimed at the paver field. The water mines bedding sand, leaves a gray fan of filter debris, and is the reason the deck dips beside the equipment pad six months after a re-lay.

Where the discharge should land

The backwash line should terminate on a dedicated splash pad or into a trapped drain, not on the walking field. We build a small paver or concrete pad set on its own base, sloped to the lawn or a drain, with a gap so the discharge does not splash back onto polymeric joints. The pad is isolated from the pool deck so a washout does not travel under the coping.

Cartridge filters do not backwash, but the rinse bucket and the filter-clean area make the same stain. A short rinse pad with a trapped drain keeps that water out of the bedding. We do not tie a backwash line into a storm inlet without the owner checking the local utility rule.

Ask for the pad with the deck

Call PaverForge Hardscapes at 727-490-9798. A photo of the filter, the discharge hose, and the stained pavers is enough to price the splash pad with a deck repair. We cover St. Pete Beach, Gulfport, Clearwater, and the rest of Pinellas.