First-Season Joint Resand After Pinellas Summer Storms

A new Pinellas driveway can look locked in June and look hungry in October. Summer cells, roof wash, and king-tide groundwater all move water through joints. Polymeric sand that cured during a dry window still loses a little at the low corner, the trench drain, and the street flare. That is maintenance, not a failed install, if the base is still tight.

PaverForge Hardscapes treats first-season resand as its own visit. We walk the field after the heavy-rain months, probe joints with a blade, and only open the courses that actually lost sand. A full tear-out is the wrong answer when the soldier course is still on pinned restraint and the proof-roll from install still holds.

Where joints fail first on this coast

• Street flares and driveway throats that take roof sheets and tire pump.

• Pool-deck sliders and weirs where splash keeps joints wet past the cure window.

• Downspout outlets that were never tied into a basin or a pop-up.

• King-tide lots where groundwater comes up through the bedding and lifts fines.

How a resand visit is run

We dry the field, vacuum the open joints, reset any edge that walked, and recharge with the same joint product the original spec used unless the owner is moving to an open-graded PICP stone. Fresh polymeric does not get a hose-down from irrigation that afternoon. If washout keeps returning at one corner, the fix is a drain or a pitch change, not a third bag of sand.

If last summer opened joints on your Pinellas drive or deck, call PaverForge Hardscapes at 727-490-9798 or send a photo of the low corner to https://www.paverforge.com.