top of page

Boat-Lift Cable Trench Covers in Paver Approaches

paverforge
Oct 1
1 min read

The lift cable has to cross the approach to reach the seawall. Bury it under a locked paver field and the next cable swap means a tear-out down the middle of the drive.

PaverForge Hardscapes sets a removable trench cover in the paver approach so the cable stays reachable and the surface stays flush. Call 727-490-9798 or book at https://www.paverforge.com/book-online.

Cover, load, and the joint

The cover sits on the same compacted base as the drive and is rated for the car or cart that crosses it. We keep the seam open enough to lift, and we do not lock it in polymeric sand. Pitch still leaves the approach so rinse water does not sit in the trench.

Best done while the approach is open. We can also cut a bay into a sound field if the cable path is known. Send a photo of the lift, the approach, and where the cable comes ashore.

Recent Posts

See All
Flush Seawall Cope-Beam Joint Pads

A seawall cope beam is the concrete cap that ties the top of the wall. The joints between cope sections move with tide, temperature, and a little settlement. When a paver patio is run tight to that jo

 
 
 
Flush Seawall King-Pile Inspection Plates

A king pile is the heavier vertical member in a sheet-pile or king-pile seawall. The bolts and the pile head often sit under a paver cap walk. Cutting the field every time a marine contractor needs to

 
 
 

Comments


  • Facebook
  • Instagram
  • Yelp

Contact Us

St. Pete Beach, Florida

727-490-9798

© 2023 by PaverForge Hardscapes. All rights reserved.

bottom of page