top of page

Flush Seawall Deadman Access Plates in Pinellas

paverforge
Oct 3
1 min read

Canal yards in St. Pete, Gulfport, and Tierra Verde often hide a deadman or tie-back a few feet inshore of the seawall. Paving over that anchor with a locked field means the next wall repair starts with a jackhammer. A flush access plate keeps the patio continuous and the anchor reachable.

What the plate has to do

The plate is a restrained paver panel, not a loose lid. It sits on a compacted pocket, matches the field bond, and lifts as a unit when a marine contractor needs the rod or the concrete anchor. We do not cut the seawall cap or alter the wall.

  • Locate the tie-back from the wall plan or a careful probe, not a guess

  • Frame the opening with edge restraint so neighboring pavers stay put

  • Keep the plate flush so it is not a trip edge on the patio

  • Label the layout on the as-built note we leave with the owner

PaverForge Hardscapes builds these plates with the patio, not as an afterthought. Call 727-490-9798 to plan one before the field is sanded.

Recent Posts

See All
Flush Seawall Cope-Beam Joint Pads

A seawall cope beam is the concrete cap that ties the top of the wall. The joints between cope sections move with tide, temperature, and a little settlement. When a paver patio is run tight to that jo

 
 
 
Flush Seawall King-Pile Inspection Plates

A king pile is the heavier vertical member in a sheet-pile or king-pile seawall. The bolts and the pile head often sit under a paver cap walk. Cutting the field every time a marine contractor needs to

 
 
 

Comments


  • Facebook
  • Instagram
  • Yelp

Contact Us

St. Pete Beach, Florida

727-490-9798

© 2023 by PaverForge Hardscapes. All rights reserved.

bottom of page