top of page

Ponce de Leon Boulevard Driveways in St. Petersburg

paverforge
Sep 15
1 min read

Ponce de Leon Boulevard cuts across central St. Petersburg with a mix of 1950s ranch lots, later additions, and side-load garages. The street itself is not the problem. The problem is a driveway that was built flat, then asked to drain toward a gutter that sits higher than the slab. PaverForge Hardscapes rebuilds those drives so water leaves the field instead of sitting against the garage door.

Crown versus single pitch

A long Ponce drive usually wants a mild crown so both edges can shed. A short, side-load drive often wants a single pitch to the street or to a side yard swale. We pick one and commit. Mixing both on the same field is how you get a birdbath in the middle.

  • City apron and right-of-way rules still apply at the sidewalk.

  • Utility lids in the field get collars so they can be raised later.

  • Irrigation that crosses the dig is marked and sleeved before base goes down.

  • 80mm pavers in herringbone for daily cars; running bond only on walks.

What we will not do

We will not glue a paver overlay onto a cracked slab that is still moving. If the concrete is failed, it comes out. If the soil under it is wet sugar sand, it gets fabric and a thicker base, not a thinner one.

Book the walkthrough

Call 727-490-9798 or use https://www.paverforge.com/book-online. A photo of the garage threshold and the street apron tells us more than a color catalog.

Recent Posts

See All
Flush Seawall Flag-Staff Socket Plates

A flush flag-staff socket plate sets a removable courtesy-flag socket in the seawall cap or dock-edge pavers so the opening is not a toe catch when the staff is out.

 
 

Comments


  • Facebook
  • Instagram
  • Yelp

Contact Us

St. Pete Beach, Florida

727-490-9798

© 2023 by PaverForge Hardscapes. All rights reserved.

bottom of page