top of page

Ridgemoor Palm Harbor Paver Driveways and Patios

paverforge
Oct 1
1 min read

Ridgemoor is the tree-lined residential pocket in eastern Palm Harbor, near East Lake and the Keystone Road corridor. Drives are longer than beach-lot aprons, oaks own the parkway strips, and HOA boards usually want a sample panel before the first pallet hits the curb. The failure mode is not salt air. It is a thin base under a long tire path, plus roots that lift the walk two years after the sand was swept.

Base section for a long east-county drive

We excavate to a firm subgrade, undercut muck, and build the crushed-concrete base in lifts with a plate compactor, then proof-roll before bedding sand goes down. Edge restraint is spiked on the outside of the border, with extra pins at the driveway flares and at any radius into the garage. A one-way cross pitch beats a decorative crown when the side swale is the only place water can go.

Walks, lanai floors, and HOA packets

Front walks get a contrasting soldier course so the step from the street to the porch reads clearly. Lanai floors stay isolated from the screen-cage posts and the house slab, with a heel-proof slot or a simple surface pitch to the cage weep. For architectural review we leave a labeled sample, a color name, and a one-page section sketch — enough for the board, not a plan set the city did not ask for.

PaverForge Hardscapes covers Palm Harbor, East Lake, and the rest of north Pinellas from our St. Pete Beach shop. Call 727-490-9798 or see paverforge.com/services.

Recent Posts

See All
Flush Seawall Flag-Staff Socket Plates

A flush flag-staff socket plate sets a removable courtesy-flag socket in the seawall cap or dock-edge pavers so the opening is not a toe catch when the staff is out.

 
 

Comments


  • Facebook
  • Instagram
  • Yelp

Contact Us

St. Pete Beach, Florida

727-490-9798

© 2023 by PaverForge Hardscapes. All rights reserved.

bottom of page