Artificial-Turf Border Restraint Pads

Artificial turf next to a paver field fails at the seam: the turf edge curls, bedding sand migrates, and the first paver row settles. PaverForge Hardscapes builds the border restraint and the paver side of that joint across Pinellas County. Call 727-490-9798 or book at https://www.paverforge.com/book-online.

Why the seam moves

Turf needs its own compacted aggregate and a nailer or plastic restraint. Pavers need edge restraint spiked into the base, not into the turf infill. If both systems share one loose edge, dogs, mowers, and cart tires peel it. We stop the paver base at a formed haunch, pin the restraint, and let the turf crew nail to their own board on the far side of that haunch.

The paver surface sits a fraction above the turf so irrigation and rinse water do not run under the first course. A hidden drain or a gap at the low end keeps water from standing in the infill.

Where we use it

Pet runs, side-yard putting strips, and the band between a pool deck and a lawn are the usual spots in St. Pete Beach, Largo, Clearwater, and Palm Harbor. The paver border can be a soldier course that matches the existing deck, so the turf reads as a panel instead of a patch.

We do not install the turf itself. We set the hard edge, the pitch, and any flush drain the turf needs to meet. Details are on https://www.paverforge.com/services.

Repair of a peeled edge

If the border has already walked, we lift the first two courses, re-compact, reset the restraint, and re-sand. Filling the gap with polymeric sand alone does not hold a turf edge that has no nailer.