What are flush seawall gas meter isolation pads?

Flush seawall gas meter isolation pads keep the gas meter and related piping accessible for inspection and service without transmitting load or vibration into the cap or the adjacent paver field. The pad stays flush so carts and hoses still cross it, and the surrounding field drains. The utility owns the meter. PaverForge Hardscapes owns the paver bay that lifts later. Call 727-490-9798.

What are flush seawall water meter isolation pads?

Flush seawall water meter isolation pads are custom pads that create a stable, level mounting surface for water meters and utility connections at the seawall. They prevent settlement in coastal soils, improve access for meter reading and service, and maintain a clean flush appearance for Pinellas County waterfront properties.

What are flush seawall utility conduit isolation pads?

A flush utility conduit isolation pad keeps the seawall-cap pavers level around a conduit chase that still has to lift for service. The frame is isolation, not structure for the wall. The marine contractor owns the conduit and the bonding. PaverForge owns the paver bay that stays flush and lifts later. Call 727-490-9798.

Condenser Whip Sleeve Collars in Pinellas Paver Pads

paverforge

Oct 2

1 min read

When a condenser is changed, the liquid-tight whip and the disconnect rarely land in the same place twice. A paver pad poured tight to the old whip has to be saw-cut on the next replacement. PaverForge sets a sleeve collar in the pad so the whip can be pulled and reset without lifting the field.

Where the sleeve goes

The collar sits at the pad edge nearest the disconnect, clear of the condenser intake and of the clearance the manufacturer wants around the coil. It is large enough for the whip and a future larger conductor, and it is capped flush so it is not a trip edge. Condensate is piped off the bedding sand, not into the sleeve.

What we do not bury

The disconnect itself stays reachable and above the flood line the electrician specifies. We do not encase the whip, and we do not cover the unit's service panel. If the pad is also the screen-cage equipment pad, the sleeve is kept inside the cage line so a later panel change does not fight the kick plate.

Ask for a whip sleeve when the pad is quoted. PaverForge Hardscapes, 727-490-9798.

Condenser Whip Sleeve Collars in Pinellas Paver Pads

Where the sleeve goes

What we do not bury

Recent Posts

Comments