What are flush seawall gas meter isolation pads?

Flush seawall gas meter isolation pads keep the gas meter and related piping accessible for inspection and service without transmitting load or vibration into the cap or the adjacent paver field. The pad stays flush so carts and hoses still cross it, and the surrounding field drains. The utility owns the meter. PaverForge Hardscapes owns the paver bay that lifts later. Call 727-490-9798.

What are flush seawall water meter isolation pads?

Flush seawall water meter isolation pads are custom pads that create a stable, level mounting surface for water meters and utility connections at the seawall. They prevent settlement in coastal soils, improve access for meter reading and service, and maintain a clean flush appearance for Pinellas County waterfront properties.

What are flush seawall utility conduit isolation pads?

A flush utility conduit isolation pad keeps the seawall-cap pavers level around a conduit chase that still has to lift for service. The frame is isolation, not structure for the wall. The marine contractor owns the conduit and the bonding. PaverForge owns the paver bay that stays flush and lifts later. Call 727-490-9798.

Dock Hose-Bib Grade Rings on a Paver Approach

paverforge

Oct 1

1 min read

Canal and bay lots in Pinellas often add a hose bib at the dock approach for boat rinse and fish-cleaning. Pave over that stub and the next wash-down means prying pavers. A grade ring keeps the bib, the valve, and the splash zone serviceable.

Flush with the approach, pitched off the seawall cap

We set the ring to the finished paver elevation so carts and bare feet do not catch a lid. The approach still falls away from the house and, where the seawall cap allows, away from the cap joint. A trapped drain in the rinse zone keeps wash water out of the bedding sand.

Salt, cleats, and the lift pedestal

Salt spray eats an uncoated frame. We use a corrosion-resistant ring, leave clearance from dock cleats and the boat-lift pedestal, and do not run the bib box through the seawall electrical pedestal pad. Irrigation and dock-water lines are located before the base is cut.

Bib and shutoff stay reachable without a tear-out
Rinse water trapped instead of pumped into the joints
Edge restraint pinned so the approach does not spread toward the cap

PaverForge builds dock approaches across Pinellas. Call 727-490-9798.

Dock Hose-Bib Grade Rings on a Paver Approach

Flush with the approach, pitched off the seawall cap

Salt, cleats, and the lift pedestal

Recent Posts

Comments