Flush Irrigation Smart-Timer Pedestal Pads

WiFi irrigation timers and their transformers do not belong in a flush valve box under the driveway, and they do not belong screwed to a rotting stake in the mulch. A small paver pedestal puts the controller at a readable height, keeps the transformer out of the mower line, and gives the electrician or irrigator a sleeve back to the valve manifold.

Height, splash, and conduit

We build the pedestal on the same compacted base as the adjacent walk, with a pinned edge so it does not walk away from the field. The top sits above typical reclaimed-water splash and above the string-trimmer line. Conduit turns up through a sleeve in the pedestal, not through a joint that will be sanded shut. The controller stays in shade where the wall allows, because a black enclosure on a south face cooks the board.

What we do not bury

The timer, the transformer, and the rain-sensor lead stay accessible. Only the supply conduit and the valve wires go below grade. If a hose bib or a backflow preventer is already on that wall, the pedestal is set so it does not block the test cocks. Joint sand stops at the pedestal face so irrigation overspray is not washing polymer into the lawn.

PaverForge Hardscapes sets these pedestals with new walks and as a stand-alone pad on existing Pinellas yards. Call 727-490-9798 or see paverforge.com/services.